Hydrogen sulfide is a noxious and toxic gas produced from decaying organic matter that contains sulfur. A lethal concentration in rats corresponds to an inhaled dose of 715 molecules per million molecules of air. How many molecules does this correspond to per mole of air? How many moles of hydrogen sulfide does this correspond to per mole of air?

Bromine, sometimes produced from brines (salt lakes) and ocean water, can be used for bleaching fibers and silks. How many moles of bromine atoms are found in 8.0 g of molecular bromine (Br₂)?

Paris yellow is a lead compound that is used as a pigment; it contains 16.09% chromium, 19.80% oxygen, and 64.11% lead. What is the empirical formula of Paris yellow?

A particular chromium compound used for dyeing and waterproofing fabrics has the elemental composition 18.36% chromium, 13.81% potassium, 45.19% oxygen, and 22.64% sulfur. What is the empirical formula of this compound?

Compounds with aluminum and silicon are commonly found in the clay fractions of soils derived from volcanic ash. One of these compounds is vermiculite, which is formed in reactions caused by exposure to weather. Vermiculite has the following formula: Ca_0.7[Si_6.6Al_1.4]Al₄O₂₀(OH)₄. (The content of calcium, silicon, and aluminum are not shown as integers because the relative amounts of these elements vary from sample to sample.) What is the mass percent of each element in this sample of vermiculite?

♦ Pheromones are chemical signals secreted by a member of one species to evoke a response in another member of the same species. One honeybee pheromone is an organic compound known as an alarm pheromone, which smells like bananas. It induces an aggressive attack by other honeybees, causing swarms of angry bees to attack the same aggressor. The composition of this alarm pheromone is 64.58% carbon, 10.84% hydrogen, and 24.58% oxygen by mass, and its molecular mass is 130.2 amu.

1. Calculate the empirical formula of this pheromone.
2. Determine its molecular formula.
3. Assuming a honeybee secretes 1.00 × 10⁻¹¹ g of pure pheromone, how many molecules of pheromone are secreted?

Amoxicillin is a prescription drug used to treat a wide variety of bacterial infections, including infections of the middle ear and the upper and lower respiratory tracts. It destroys the cell walls of bacteria, which causes them to die. The elemental composition of amoxicillin is 52.59% carbon, 5.24% hydrogen, 11.50% nitrogen, 21.89% oxygen, and 8.77% sulfur by mass. What is its empirical formula?

Monosodium glutamate (MSG; molar mass = 169 g/mol), is used as a flavor enhancer in food preparation. It is known to cause headaches and chest pains in some individuals, the so-called Chinese food syndrome. Its composition was found to be 35.51% carbon, 4.77% hydrogen, 8.28% nitrogen, and 13.59% sodium by mass. If the “missing” mass is oxygen, what is the empirical formula of MSG?

Ritalin is a mild central nervous system stimulant that is prescribed to treat attention deficit disorders and narcolepsy (an uncontrollable desire to sleep). Its chemical name is methylphenidate hydrochloride, and its empirical formula is C₁₄H₂₀ClNO₂. If you sent a sample of this compound to a commercial laboratory for elemental analysis, what results would you expect for the mass percentages of carbon, hydrogen, and nitrogen?

Fructose, a sugar found in fruit, contains only carbon, oxygen, and hydrogen. It is used in ice cream to prevent a sandy texture. Complete combustion of 32.4 mg of fructose in oxygen produced 47.6 mg of CO₂ and 19.4 mg of H₂O. What is the empirical formula of fructose?

Coniine, the primary toxin in hemlock, contains only carbon, nitrogen, and hydrogen. When ingested, it causes paralysis and eventual death. Complete combustion of 28.7 mg of coniine produced 79.4 mg of CO₂ and 34.4 mg of H₂O. What is the empirical formula of the coniine?

Copper and tin alloys (bronzes) with a high arsenic content were presumably used by Bronze Age metallurgists because bronze produced from arsenic-rich ores had superior casting and working properties. The compositions of some representative bronzes of this type are as follows:

If ancient metallurgists had used the mineral As₂S₃ as their source of arsenic, how much As₂S₃ would have been required to process 100 g of cuprite (Cu₂O) bronzes with these compositions?

♦ The phrase mad as a hatter refers to mental disorders caused by exposure to mercury(II) nitrate in the felt hat manufacturing trade during the 18th and 19th centuries. An even greater danger to humans, however, arises from alkyl derivatives of mercury.

1. Give the empirical formula of mercury(II) nitrate.
2. One alkyl derivative, dimethylmercury, is a highly toxic compound that can cause mercury poisoning in humans. How many molecules are contained in a 5.0 g sample of dimethylmercury?
3. What is the percentage of mercury in the sample?

Magnesium carbonate, aluminum hydroxide, and sodium bicarbonate are commonly used as antacids. Give the empirical formulas and determine the molar masses of these compounds. Based on their formulas, suggest another compound that might be an effective antacid.

♦ Nickel(II) acetate, lead(II) phosphate, zinc nitrate, and beryllium oxide have all been reported to induce cancers in experimental animals.

1. Give the empirical formulas for these compounds.
2. Calculate their formula masses.
3. Based on the location of cadmium in the periodic table, would you predict that cadmium chloride might also induce cancer?

♦ Methane, the major component of natural gas, is found in the atmospheres of Jupiter, Saturn, Uranus, and Neptune.

1. What is the structure of methane?
2. Calculate the molecular mass of methane.
3. Calculate the mass percentage of both elements present in methane.

Sodium saccharin, which is approximately 500 times sweeter than sucrose, is frequently used as a sugar substitute. What are the percentages of carbon, oxygen, and sulfur in this artificial sweetener?

Lactic acid, found in sour milk, dill pickles, and sauerkraut, has the functional groups of both an alcohol and a carboxylic acid. The empirical formula for this compound is CH₂O, and its molar mass is 90 g/mol. If this compound were sent to a laboratory for elemental analysis, what results would you expect for carbon, hydrogen, and oxygen content?

The compound 2-nonenal is a cockroach repellant that is found in cucumbers, watermelon, and carrots. Determine its molecular mass.

You have obtained a 720 mg sample of what you believe to be pure fructose, although it is possible that the sample has been contaminated with formaldehyde. Fructose and formaldehyde both have the empirical formula CH₂O. Could you use the results from combustion analysis to determine whether your sample is pure?

♦ The booster rockets in the space shuttles used a mixture of aluminum metal and ammonium perchlorate for fuel. Upon ignition, this mixture can react according to the chemical equation

Al(s) + NH₄ClO₄(s) → Al₂O₃(s) + AlCl₃(g) + NO(g) + H₂O(g)

Balance the equation and construct a table showing how to interpret this information in terms of the following:

1. numbers of individual atoms, molecules, and ions
2. moles of reactants and products
3. grams of reactants and products
4. numbers of molecules of reactants and products given 1 mol of aluminum metal

♦ One of the byproducts of the manufacturing of soap is glycerol. In 1847, it was discovered that the reaction of glycerol with nitric acid produced nitroglycerin according to the following unbalanced chemical equation:

Nitroglycerine is both an explosive liquid and a blood vessel dilator that is used to treat a heart condition known as angina.

1. Balance the chemical equation and determine how many grams of nitroglycerine would be produced from 15.00 g of glycerol.
2. If 9.00 g of nitric acid had been used in the reaction, which would be the limiting reactant?
3. What is the theoretical yield in grams of nitroglycerin?
4. If 9.3 g of nitroglycerin was produced from 9.0 g of nitric acid, what would be the percent yield?
5. Given the data in part d, how would you rate the success of this reaction according to the criteria mentioned in this chapter?
6. Derive a general expression for the theoretical yield of nitroglycerin in terms of x grams of glycerol.

♦ A significant weathering reaction in geochemistry is hydration–dehydration. An example is the transformation of hematite (Fe₂O₃) to ferrihydrite (Fe₁₀O₁₅·9H₂O) as the relative humidity of the soil approaches 100%:

Fe₂O₃(s) + H₂O(l) → Fe₁₀O₁₅·9H₂O(s)

This reaction occurs during advanced stages of the weathering process.

1. Balance the chemical equation.
2. Is this a redox reaction? Explain your answer.
3. If 1 tn of hematite rock weathered in this manner, how many kilograms of ferrihydrite would be formed?

♦ Hydrazine (N₂H₄) is used not only as a rocket fuel but also in industry to remove toxic chromates from waste water according to the following chemical equation:

4CrO₄²⁻(aq) + 3N₂H₄(l) + 4H₂O(l) → 4Cr(OH)₃(s) + 3N₂(g) + 8OH⁻(aq)

Identify the species that is oxidized and the species that is reduced. What mass of water is needed for the complete reaction of 15.0 kg of hydrazine? Write a general equation for the mass of chromium(III) hydroxide [Cr(OH)₃] produced from x grams of hydrazine.

♦ Corrosion is a term for the deterioration of metals through chemical reaction with their environment. A particularly difficult problem for the archaeological chemist is the formation of CuCl, an unstable compound that is formed by the corrosion of copper and its alloys. Although copper and bronze objects can survive burial for centuries without significant deterioration, exposure to air can cause cuprous chloride to react with atmospheric oxygen to form Cu₂O and cupric chloride. The cupric chloride then reacts with the free metal to produce cuprous chloride. Continued reaction of oxygen and water with cuprous chloride causes “bronze disease,” which consists of spots of a pale green, powdery deposit of [CuCl₂·3Cu(OH)₂·H₂O] on the surface of the object that continues to grow. Using this series of reactions described, complete and balance the following equations, which together result in bronze disease:

Equation 1: ___ + O₂ → ___ + ___

Equation 2: ___ + Cu → ___

Equation 3: ___ + O₂ + H₂O → $\underset{\text{bronze disease}}{{\text{CuCl}}_{\text{2}}·{\text{3Cu(OH)}}_{\text{2}}·{\text{H}}_{\text{2}}\text{O}}+{\text{CuCl}}_{\text{2}}$

1. Which species are the oxidants and the reductants in each equation?
2. If 8.0% by mass of a 350.0 kg copper statue consisted of CuCl, and the statue succumbed to bronze disease, how many pounds of the powdery green hydrate would be formed?
3. What factors could affect the rate of deterioration of a recently excavated bronze artifact?

♦ Iron submerged in seawater will react with dissolved oxygen, but when an iron object, such as a ship, sinks into the seabed where there is little or no free oxygen, the iron remains fresh until it is brought to the surface. Even in the seabed, however, iron can react with salt water according to the following unbalanced chemical equation:

Fe(s) + NaCl(aq) + H₂O(l) → FeCl₂(s) + NaOH(aq) + H₂(g)

The ferrous chloride and water then form hydrated ferrous chloride according to the following equation:

FeCl₂(s) + 2H₂O(l) → FeCl₂·2H₂O(s)

When the submerged iron object is removed from the seabed, the ferrous chloride dihydrate reacts with atmospheric moisture to form a solution that seeps outward, producing a characteristic “sweat” that may continue to emerge for many years. Oxygen from the air oxidizes the solution to ferric resulting in the formation of what is commonly referred to as rust (ferric oxide):

FeCl₂(aq) + O₂(g) → FeCl₃(aq) + Fe₂O₃(s)

The rust layer will continue to grow until arrested.

1. Balance each chemical equation.
2. Given a 10.0 tn ship of which 2.60% is now rust, how many kilograms of iron were converted to FeCl₂, assuming that the ship was pure iron?
3. What mass of rust in grams would result?
4. What is the overall change in the oxidation state of iron for this process?
5. In the first equation given, what species has been reduced? What species has been oxidized?

♦ The glass industry uses lead oxide in the production of fine crystal glass, such as crystal goblets. Lead oxide can be formed by the following reaction:

PbS(s) + O₂(g) → PbO(s) + SO₂(g)

Balance the equation and determine what has been oxidized and what has been reduced. How many grams of sulfur dioxide would be produced from 4.0 × 10³ g of lead sulfide? Discuss some potential environmental hazards that stem from this reaction.

♦ The Deacon process is one way to recover Cl₂ on-site in industrial plants where the chlorination of hydrocarbons produces HCl. The reaction uses oxygen to oxidize HCl to chlorine, as shown.

HCl(g) + O₂(g) → Cl₂(g) + H₂O(g)

The reaction is frequently carried out in the presence of NO as a catalyst.

1. Balance the chemical equation.
2. Which compound is the oxidant, and which is the reductant?
3. If 26 kg of HCl was produced during a chlorination reaction, how many kilograms of water would result from the Deacon process?

In 1834, Eilhardt Mitscherlich of the University of Berlin synthesized benzene (C₆H₆) by heating benzoic acid (C₆H₅COOH) with calcium oxide according to this balanced chemical equation:

$${\text{C}}_{\text{6}}{\text{H}}_{\text{5}}\text{COOH(s) }+\text{ CaO(s)}\stackrel{\Delta }{\to }{\text{C}}_{\text{6}}{\text{H}}_{\text{6}}\text{(l)}+{\text{CaCO}}_{\text{3}}\text{(s)}$$

(Heating is indicated by the symbol Δ.) How much benzene would you expect from the reaction of 16.9 g of benzoic acid and 18.4 g of calcium oxide? Which is the limiting reactant? How many grams of benzene would you expect to obtain from this reaction, assuming a 73% yield?

Aspirin (C₉H₈O₄) is synthesized by the reaction of salicylic acid (C₇H₆O₃) with acetic anhydride (C₄H₆O₃) according to the following equation:

C₇H₆O₃(s) + C₄H₆O₃(l) → C₉H₈O₄(s) + H₂O(l)

Balance the equation and find the limiting reactant given 10.0 g of acetic anhydride and 8.0 g of salicylic acid. How many grams of aspirin would you expect from this reaction, assuming an 83% yield?

♦ Hydrofluoric acid etches glass because it dissolves silicon dioxide, as represented in the following chemical equation:

SiO₂(s) + HF(aq) → SiF₆²⁻(aq) + H⁺(aq) + H₂O(l)

1. Balance the equation.
2. How many grams of silicon dioxide will react with 5.6 g of HF?
3. How many grams of HF are needed to remove 80% of the silicon dioxide from a 4.0 kg piece of glass? (Assume that the glass is pure silicon dioxide.)

♦ Lead sulfide and hydrogen peroxide react to form lead sulfate and water. This reaction is used to clean oil paintings that have blackened due to the reaction of the lead-based paints with atmospheric hydrogen sulfide.

1. Write the balanced chemical equation for the oxidation of lead sulfide by hydrogen peroxide.
2. What mass of hydrogen peroxide would be needed to remove 3.4 g of lead sulfide?
3. If the painting had originally been covered with 5.4 g of lead sulfide and you had 3.0 g of hydrogen peroxide, what percent of the lead sulfide could be removed?

♦ It has been suggested that diacetylene (C₄H₂, HC≡C–C≡CH) may be the ozone of the outer planets. As the largest hydrocarbon yet identified in planetary atmospheres, diacetylene shields planetary surfaces from ultraviolet radiation and is itself reactive when exposed to light. One reaction of diacetylene is an important route for the formation of higher hydrocarbons, as shown in the following chemical equations:

C₄H₂(g) + C₄H₂(g) → C₈H₃(g) + H(g) C₈H₃(g) + C₄H₂(g) → C₁₀H₃(g) + C₂H₂(g)

Consider the second reaction.

1. Given 18.4 mol of C₈H₃ and 1000 g of C₄H₂, which is the limiting reactant?
2. Given 2.8 × 10²⁴ molecules of C₈H₃ and 250 g of C₄H₂, which is the limiting reactant?
3. Given 385 g of C₈H₃ and 200 g of C₄H₂, which is in excess? How many grams of excess reactant would remain?
4. Suggest why this reaction might be of interest to scientists.

♦ Glucose (C₆H₁₂O₆) can be converted to ethanol and carbon dioxide using certain enzymes. As alcohol concentrations are increased, however, catalytic activity is inhibited, and alcohol production ceases.

1. Write a balanced chemical equation for the conversion of glucose to ethanol and carbon dioxide.
2. Given 12.6 g of glucose, how many grams of ethanol would be produced, assuming complete conversion?
3. If 4.3 g of ethanol had been produced, what would be the percent yield for this reaction?
4. Is a heterogeneous catalyst or a homogeneous catalyst used in this reaction?
5. You have been asked to find a way to increase the rate of this reaction given stoichiometric quantities of each reactant. How would you do this?

Early spacecraft developed by the National Aeronautics and Space Administration for its manned missions used capsules that had a pure oxygen atmosphere. This practice was stopped when a spark from an electrical short in the wiring inside the capsule of the Apollo 1 spacecraft ignited its contents. The resulting explosion and fire killed the three astronauts on board within minutes. What chemical steps could have been taken to prevent this disaster?